HEAT PUMPS

Beading and Starter Track Spray Paint - 400ml 1K - Almond

Product Code: spray- 28030

Availability:In stock

£0.00 0.00

Qty

Ask about this product

Beading and Starter Track Spray Paint

\nOur Beading and Starter Track Spray Paint is professionally mixed and filled to supply high-quality aerosol spray paint cans. We have access to specialist paint-mixing equipment and technicians, allowing us to supply and match any RAL, Pantone or NCS colour code. \n \nBeading and Starter Track Spray paints are custom-mixed and sealed into high-quality 400ml aerosol rattle cans. \n

Application of Beading and Starter Track Spray Paint

\nPlease beware that all breathing equipment and health and safety should be considered. \n \nWe highly recommend the use of a primer for almost all your painting plans. When choosing a primer, it is essential to select the proper primer for the surface material you plan to apply the topcoat to. 1K Aerosol paint takes around 30 minutes to cure completely. \n \nDirections for use: \n
    \n
  1. Ensure the surface to be painted is clean and dry
  2. \n
  3. Mask adjacent area with tape
  4. \n
  5. Shake can for two minutes before painting
  6. \n
  7. Test product first on a smaller area to check the colour
  8. \n
  9. Hold spray head at a distance of 20 to 30cm away from the surface to be painted
  10. \n
  11. Spray with an even stroke from right to left and release spray head after each stroke
  12. \n
  13. After use, clear spray head with invert by spraying until only clear gas is emitted
  14. \n
  15. If spray head should clog, remove and clean with cellulose thinners
  16. \n
  17. Never point spray head towards a person
  18. \n
\n

Storing Beading and Starter Track Spray Paint

\n
    \n
  • Store away from foodstuffs
  • \n
  • Do not seal receptacle gas tight
  • \n
  • Keep container tightly sealed
  • \n
  • Store in cool, dry conditions in well-sealed receptacles
  • \n
  • Protect from heat and direct sunlight
  • \n
  • Store in a cool location
  • \n
  • Observe official regulations on storing packaging with pressurised containers
  • \n
\n

Beading and Starter Track Spray Paint coverage rates

\nYou can expect to coat roughly 2 square meters in a single coat using 400ml aerosols. \n \nFor best results, we recommend applying 2-4 coats depending on the colour and surface material chosen; for lighter colours, colour may need to be re-coated.